Polish mills are the undisputed champions of the production of wooden products treated in autoclave. They are equipped with modern milling lines and offer a wide range of machine rounded poles, and stakes (with a smooth and regular surface). Lengths range up to 6m, and diameters between 5 and 24 cm.
Machine Rounded Poles present a smooth and regular surface. They are flat and chamfered at both ends.
Machine Rounded Stakes present a smooth and regular surface. They have one pointed end, and one flat and chamfered end (Ø ? 16cm). The standard milling of stakes is 4 sides pointing. Upon request, “pencil pointing” is also available (Ø ? 10cm).
4 sides pointed end
Pencil pointed end
The Machine Rounded Half Poles are Machine Rounded Poles that have been split in two. Consequently, one Pole = two Half Poles.
One unit of Machine Rounded Half Pole
The Machine Rounded Flat Poles are Machine Rounded Poles (with a diameter greater than or equal to 12cm) that have been planed on two sides.
Poles Borders are Machine Rounded Poles, Machine Rounded Stakes, or Machine Rounded Half Poles which have been cut to shorter lengths.
The Round Posts Fencing are an assembly of Machine Rounded Poles fitting together. These fences are made of posts and handrails. The posts are drilled poles of different kinds :
Starting Post : drilled with 2 blind holes
Intermediate Post : drilled with 2 crossing holes
Corner Post : drilled with 2×2 blind holes forming an angle of 90 °
Vineyard Stakes are the only products in our range of Round Wood not to be Machine Rounded. They are just debarked. Therefore, their diameter is not regular, and their surface is not smooth. One of their ends is pointed, the other one is flat but not chamfered.
Our production capabilities do not stop at the ranges of products listed here above. We will gladly answer to any demand for products in Scots Pine: fences, screens, garden furniture, pergolas, garden sheds and cottages, carports, flower boxes, etc.